During intense spring and summer rain, combined and overloaded municipal sewers can fill faster than they drain. When that happens, sewage can flow backward up the lateral and out of the lowest openings in a house, usually a basement floor drain or a below-grade toilet. A backwater valve is a one-way gate on the main sewer line that lets waste leave and closes when flow reverses.
Signs you may need one
- A floor drain gurgles or bubbles during storms
- Water or sewage has come up through a basement drain before
- Neighbors on your street have reported sewer backups
- You are finishing a basement or adding a bathroom below street level
How it is installed
The plumber locates the main building drain, usually in the basement floor, and cuts a section of the slab to reach it. The valve body is set in line, with an access cover at floor level so the flap can be inspected and cleaned. Many cities require a permit for this work, and some offer rebates for installing one, so ask your local building department.
Living with a backwater valve
When the valve is closed during a backup, water from your own fixtures cannot leave either. Avoid running the washer, dishwasher or showers during a heavy storm if the valve is shut. Check the flap once or twice a year for debris that could hold it open.
We connect homeowners in Bascom, FL with plumbers who install and service backwater valves.